Users Guide

For the latest supported platforms, see the Dell Chassis Management Controller (CMC) Version 2.0 for Dell PowerEdge FX2/FX2s Release
Notes available at dell.com/cmcmanuals.
Supported web browsers
For the latest information about supported web browsers, see the Dell Chassis Management Controller (CMC) Version 2.1 for Dell
PowerEdge FX2/FX2s Release Notes at dell.com/cmcmanuals.
• Microsoft Internet Explorer 11
• Microsoft EDGE
• Safari version 8.0.8
• Safari version 9.0.3
• Mozilla Firefox 57
• Mozilla Firefox 58
• Google Chrome 62
• Google Chrome 63
NOTE: By default, TLS 1.1 and TLS 1.2 are supported in this release. However, to enable TLS 1.0 use the following racadm
command:
$ racadm config -g cfgRacTuning -o cfgRacTuneTLSProtocolVersionEnable TLSv1.0+
Supported rmware versions
The following table lists the rmware versions for BIOS, iDRAC, and Lifecycle Controller that support the servers listed:
Table 4. Latest Firmware Versions for BIOS, iDRAC, and Lifecycle Controller
Servers BIOS iDRAC Lifecycle Controller
PowerEdge FC830 2.7.1 2.52.52.52 2.52.52.52
PowerEdge FC630 2.7.1 2.52.52.52 2.52.52.52
PowerEdge FC430 2.7.1 2.52.52.52 2.52.52.52
PowerEdge FM120 1.70 2.52.52.52 2.52.52.52
PowerEdge FC640 1.37 3.18.18.18 3.18.18.18
Supported Firmware Versions for Server Component
Update
The following table lists the supported rmware versions for server components when CMC PowerEdge FX2/FX2s rmware is updated
from 2.0 to 2.1 version but the server components are not updated to the next version.
Table 5. Supported Server Component Versions for Server Component Update to N version
Platform Server Component Previous Component Version (N-1
Version)
Updated Component Version (N
Version)
FD332 SAS RAID FW 25.2.2-0004 25.4.0.0015
FC430 iDRAC 2.52.52.52 2.60.60.60
16 Overview