Users Guide

8 In the WWN/MAC Addresses eld, enter the MAC address to view only the slots associated with the specic MAC address.
Alternately, partially enter the MAC address entries to view the associated slots. For example, enter 4A to view the slots with MAC
addresses that contain 4A.
9 From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition status.
If a particular partition is disabled, the status is displayed as Disabled and the row displaying the partition is greyed out.
For information about the elds, see the CMC for Dell PowerEdge FX2/FX2s Online Help.
Viewing WWN or MAC address information using
RACADM
To view WWN/MAC address information for all servers or specic servers using RACADM, use the getexaddr and getmacaddress
subcommands.
To display Flexaddress for the entire chassis, use the following RACADM command:
racadm getflexaddr
To display Flexaddress status for a particular slot, use the following RACADM command:
racadm getflexaddr [-i <slot#>]
where <slot #> is a value from 1 to 4.
To display the NDC or LOM MAC address, use the following RACADM command:
racadm getmacaddress
To display the MAC address for chassis, use the following RACADM command:
racadm getmacaddress -m chassis
To display the iSCSI MAC addresses for all servers, use the following RACADM command:
racadm getmacaddress -t iscsi
To display the iSCSI MAC for a specic server, use the following RACADM command:
racadm getmacaddress [-m <module> [-x]] [-t iscsi]
To display the user-dened MAC and WWN address, use the following RACADM command:
racadm getmacaddress -c io-identity
racadm getmacaddress -c io-identity -m server -2
To display Ethernet and iSCSI MACS addresses of all LOMs or mezzanine cards, use the following RACADM command:
racadm getmacaddress -a
To display the console assigned MAC/WWN of all LOMs or mezzanine cards, use the following RACADM command:
racadm getmacaddress -c all
To display the chassis assigned WWN/MAC address, use the following RACADM command:
racadm getmacaddress -c flexaddress
To display the MAC/WWN addresses for all LOMs or mezzanine cards, use the following RACADM command:
racadm getmacaddress -c factory
For more information on the getexaddr and getmacaddress subcommand, see the Dell Chassis Management Controller for PowerEdge
FX2/FX2s RACADM Command Line Reference Guide.
Using FlexAddress and FlexAddress Plus cards
137