Users Guide

To view the chassis health, click Chassis Overview. The system displays the overall health status of the chassis, active and standby
CMCs, server modules, IO Module (IOM), fans, blowers, power supply units (PSUs), LCD assembly, storage controller, and PCIe devices.
Detailed information about each component is displayed when you click that component. In addition, the latest events in the CMC
Hardware Log are also displayed. For more information, see the Online Help.
If your chassis is configured as a Group Lead, the Group Health page is displayed after login. It displays the chassis level information and
alerts. All active, critical, and non-critical alerts are displayed.
Chassis Graphics
The chassis is represented by the front and back views (the upper and lower images respectively). Servers, DVDs, HDDs, KVMs, and LCD
are shown in the front view and the remaining components are shown in the back view. Component selection is indicated by a blue cast
and is controlled by clicking the image of the required component. When a component is present in the chassis, an icon of the component
type is displayed in the graphics in the position (slot), where the component has been installed. Empty positions are shown with a charcoal
gray background. The component icon visually indicates the state of the component. Other components display icons that visually
represent the physical component. Pausing the cursor over a component displays a tool tip with additional information about that
component.
Table 8. Server Icon States
Icon Description
A server is present, turned on, and is operating normally.
A server is present, but turned off.
A server is present, but reporting a noncritical error.
62 Viewing Chassis Information and Monitoring Chassis and Component Health