Users Guide

Item Description
Slot Name Chassis slot name. For example, SLOT-01.
NOTE: You can set this table through the CMC CLI or CMC Web interface.
Name Name of the server, which the user can set through Dell OpenManage. The name is
displayed only if iDRAC has finished booting, and the server supports this feature, else
iDRAC booting messages are displayed.
Model Number Displays if iDRAC finished booting.
Service Tag Displays if iDRAC finished booting.
BIOS Version Server BIOS firmware version.
Last POST Code Displays the last server BIOS POST code messages string.
iDRAC Firmware Version Displays if iDRAC finished booting.
NOTE: iDRAC version 1.01 is displayed as 1.1. There is no iDRAC version 1.10.
IP4 <enabled, disabled> Displays the current IPv4 enabled state.
IP4 Address: <address, acquiring> Only displays if IPv4 is enabled.
IP6 <enabled, disabled> Only displays if iDRAC supports IPv6. Displays current IPv6-enabled state.
IP6 Local Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.
IP6 Global Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.
FlexAddress enabled on Fabrics Only displays if the feature is installed. Lists the fabrics enabled for this server (that is, A,
B, C).
The information in the table is dynamically updated. If the server does not support this feature, then the following information does not
appear, else Server Administrator options are as follows:
• Option “None” = No strings must be displayed on the LCD.
• Option “Default” = No Effect.
• Option “Custom” = Allows you to enter a string name for the server.
The information is displayed only if iDRAC has completed booting. For more information on this feature, see the RACADM Command Line
Reference Guide for CMC in PowerEdge VRTX.
Using LCD Panel Interface
197