Users Guide

Gathering Configuration Information, Chassis
Status, and Logs Using RACDUMP
The racdump subcommand provides a single command to get comprehensive chassis status, configuration state information, and the
historic event logs.
The racdump subcommand displays the following information:
• General system/RAC information
• CMC information
• Chassis information
• Session information
• Sensor information
• Firmware build information
Supported Interfaces
• CLI RACADM
• Remote RACADM
• Telnet RACADM
racdump includes the following subsystems and aggregates the following RACADM commands. For more information about racdump,
see the RACADM Command Line Reference Guide for CMC in PowerEdge VRTX.
Subsystem
RACADM Command
General System/RAC information
getsysinfo
Session information
getssninfo
Sensor information
getsensorinfo
Switches information (IO Module)
getioinfo
Mezzanine card information (Daughter card)
getdcinfo
All modules information
getmodinfo
Power budget information
getpbinfo
KVM information
getkvminfo
NIC information (CMC module)
getniccfg
Redundancy information
getredundancymode
Trace log information
gettracelog
RAC event log
getraclog
System event log
getsel
Downloading SNMP Management Information Base (MIB)
File
The CMC SNMP MIB file defines the chassis types, events, and indicators. CMC enables you to download the MIB file using the web
interface.
To download the CMC's SNMP Management Information Base (MIB) file using the CMC web interface:
1. In the left pane, click Chassis Overview > Network > Services > SNMP.
2. In the SNMP Configuration section, click Save to download the CMC MIB file to your local system.
For more information about the SNMP MIB file, see the Dell OpenManage Server Administrator SNMP Reference Guide at dell.com/
support/manuals.
182
Troubleshooting and Recovery