Users Guide

To apply the virtual adapter access policy:
1. In the left pane, click Chassis Overview > Storage > Virtual Disks > Assign.
2. On the Assign Virtual Disks page, under the Access Policy for Virtual Adapters section, from the Virtual Adapter <number>
drop-down menu, select Full Access to each physical disk drive.
3. Click Apply.
You can now assign virtual adapters to server slots. For more information, see the Assigning Virtual Adapters to Slots section in this User's
Guide.
Modifying Virtual Disk Properties Using CMC Web
Interface
To modify the virtual disk properties:
1. In the left pane, click Chassis Overview > Storage > Virtual Disks > Manage.
2. On the Manage Virtual Disks page, from the Virtual Disk Actions drop-down menu, select one of the following actions, and then
click Apply.
• Rename
• Delete
NOTE: If you select Delete, the following message is shown indicating that deleting a virtual disk will permanently
delete data available in that virtual disk.
Deleting the virtual disk removes the virtual disk from the controller's configuration.
Initializing the virtual disk permanently erases data from the virtual disk.
• Edit Policy: Read Cache
• Edit Policy: Write Cache
• Edit Policy: Disk Cache
• Initialize: Fast
• Initialize: Full
Enclosure Management Module
Enclosure Management Module (EMM) provides data path and enclosure management tasks for enclosure. EMM monitors and controls
the enclosure components and access to the drives.
EMM communicates enclosure attributes and states to the host server. The EMM modules monitor the following components of the
enclosure:
• Fans
• Power supplies
• Temperature probes
• Insertion or removal of a physical disk
• LEDs on the enclosure
Viewing EMM Status and attributes
EMM status displays the health of the EMM. EMMs contain a status value that is unique from the enclosure. You can have up to two
EMMs. Enclosure firmware creates a status for each EMM.
Viewing EMM Status and Attributes Using Web Interface
To view the status and attributes of the EMM:
Click Chassis Overview → Storage → Enclosures → Properties. The Enclosures page provides the EMM status and attributes of
the enclosures in the chassis. Expand the integrated enclosure or external enclosures to view the status and attributes of the EMM. For
more information, see the CMC Online Help.
Managing Chassis Storage
173