Users Guide

Situation Command Output
SD card in the active CMC module that is
not bound to any service tag.
$racadm featurecard -s
The feature card inserted is
valid and contains the
following feature(s)
FlexAddress:not bound
FlexAddress feature not active on the
chassis for any reason (No SD card
inserted/ corrupt SD card/ after feature
deactivated /SD card bound to a different
chassis).
$racadm setflexaddr [-f
<fabricName> <slotState>]
$racadm setflexaddr [-i <slot#>
<slotstate>]
ERROR: Flexaddress feature is
not active on the chassis
Guest user attempts to set FlexAddress on
slots/fabrics.
$racadm setflexaddr [-f
<fabricName> <slotState>]
$racadm setflexaddr [-i <slot#>
<slotstate>]
ERROR: Insufficient user
privileges to perform operation
Deactivating FlexAddress feature with
chassis powered ON.
$racadm feature -d -c
flexaddress
ERROR: Unable to deactivate the
feature because the chassis is
powered ON
Guest user tries to deactivate the feature
on the chassis.
$racadm feature -d -c
flexaddress
ERROR: Insufficient user
privileges to perform operation
Changing the slot/fabric FlexAddress
settings while the server modules are
powered ON.
$racadm setflexaddr -i 1 1
ERROR: Unable to perform the
set operation because it
affects a powered ON server
Changing the Flexaddress settings of slot or
fabric, when the CMC Enterprise License is
not installed.
$racadm setflexaddr -i<slotnum>
<status>
$racadm setflexaddr -
f<FabricName> <status>
ERROR: SWC0242 : A required
license is missing or expired.
Obtain an appropriate license
and try again, or contact your
service provider for additional
details.
NOTE: To resolve this issue, you
must have a FlexAddress
Enablement license.
FlexAddress DELL SOFTWARE LICENSE
AGREEMENT
This is a legal agreement between you, the user, and Dell Products L.P. or Dell Global B.V. ("Dell"). This agreement covers all software that
is distributed with the Dell product, for which there is no separate license agreement between you and the manufacturer or owner of the
software (collectively the "Software"). This agreement is not for the sale of Software or any other intellectual property. All title and
intellectual property rights in and to Software is owned by the manufacturer or owner of the Software. All rights not expressly granted
under this agreement are reserved by the manufacturer or owner of the Software. By opening or breaking the seal on the Software
packet(s), installing or downloading the Software, or using the Software that has been preloaded or is embedded in your product, you
agree to be bound by the terms of this agreement. If you do not agree to these terms, promptly return all Software items (disks, written
materials, and packaging) and delete any preloaded or embedded Software.
You may use one copy of the Software on only one computer at a time. If you have multiple licenses for the Software, you may use as
many copies at any time as you have licenses. "Use" means loading the Software in temporary memory or permanent storage on the
computer. Installation on a network server solely for distribution to other computers is not "use" if (but only if) you have a separate license
for each computer to which the Software is distributed. You must ensure that the number of persons using the Software installed on a
network server does not exceed the number of licenses that you have. If the number of users of Software installed on a network server
exceeds the number of licenses, you must purchase additional licenses until the number of licenses equals the number of users before
allowing additional users to use the Software. If you are a commercial customer of Dell or a Dell affiliate, you hereby grant Dell, or an agent
selected by Dell, the right to perform an audit of your use of the Software during normal business hours, you agree to cooperate with Dell
in such audit, and you agree to provide Dell with all records reasonably related to your use of the Software. The audit is limited to
verification of your compliance with the terms of this agreement.
Using FlexAddress and FlexAdress Plus
147