Release Notes

upported Server Modules

• Supported platforms: PowerEdge M630, M520, M620, M820, and M830 servers.

• Mainboard firmware: 2.00 or later (2.20 or later for JBOD support when available)

• iDRAC7 version: 1.66.56 or later

• iDRAC8 version: 2.05.05 or later (M630 Servers)

• PowerEdge M520 BIOS version: 2.1.3 or later

• PowerEdge M620 BIOS version: 2.2.7 or later

• PowerEdge M820 BIOS version: 2.0.24 or later

• PowerEdge M820 BIOS version: 0.3.35 or later

• PowerEdge M830 BIOS version: 1.1.5 or later

What’s New?

Release 2.10

• Support for PowerEdge M830 Blade server for PowerEdge VRTX Chassis.

• Support for 1100W PSU.

• Pre-enablement support for Shared External Storage expansion (JBOD support).

• Firmware and driver refresh of COMMs cards on Dell's 13th generation PowerEdge servers.

• Support for Emulex Fibre Channel (FC) 8 HBA adapters.

• Capture and replicate chassis configurations through XML based on Chassis configuration profile.

• Support for blinking server identification LED using Quick Link.

• Backup or restore through XML based on chassis configuration profile.

• Create and deploy a library of Boot Identity Profiles (boot from iSCSI/SAN configurations) to

enable a quick restore of workload to a spare server.

Fixes

• Fixed an issue with the "getmacaddress -c all” command displaying partial IO Identity values for

the Intel Dual Port Network Card 10 GBE.

• Fixed an issue with the “getmacaddress –m server-x –t iscsi” command displaying non-iSCS

MAC addresses after using the iSCSI filter.

• Fixed an issue with flash media features displaying invalid media for active controllers after

restoring the chassis.

•

Fixed an issue with the external storage expansion where chassis logs and alerts are not

generated.

Release 2.04

• Fixed an issue where CMC sometimes does not notify or display the storage changes until a

chassis powercycle, CMC reset, or failover is performed.

• Fixed an issue where CMC user interface may become unresponsive while CMC is still accessibl

thr

ough other interfaces such as CLI (SSH, Serial, telnet) and WS-MAN

Dell - Internal Use - Confidential