Reference Guide

setassettag

Description Sets the N-byte ASCII asset tag for the chassis.

To use this subcommand, you must have the Administrator privilege.

NOTE: The special characters \ (backslash), & (ampersand), ` (backward

quotation mark), and " (double quotation mark) are not supported for this

subcommand.

Synopsis

racadm setassettag -m chassis <asset tag>

Input -m <module> — Specifies the module whose asset tag you want to set.

Legal value: chassis

You can obtain the same output if you do not include this option, because

there is only one legal value.

<assettag> is a maximum of 64 non-extended ASCII characters.

Example

• racadm setassettag -m chassis 783839–33

• racadm setassettag 783839–33

The asset tag was changed successfully.

setchassisname

Description Sets the name of the chassis in the LCD.

To use this subcommand, you must have the

Administrator privilege.

NOTE: The special characters \ (backslash), &

(ampersand), ` (back quote), and " (double

quote) are not supported for this

subcommand.

Synopsis

racadm setchassisname <name>

NOTE: Chassisname is a maximum of 64 non-

extended ASCII characters.

Example

racadm setchassisname dellchassis-1

The chassis name was set successfully.