Reference Guide

• Get Power Status on iDRAC

racadm serveraction powerstatus

Server Power Status: ON

• Reseat server 2 on CMC

$ racadm serveraction -m server-2 reseat -f

Server power operation successful

• Explanation of Support

iDRAC needs to support graceful shutdown

The support of address individual blades is expected on the CMC

set

Description

Import saved CMC configuration or CMC Event Filter configuration from a file.

NOTE: If CMC is not in the network, you cannot import the chassis

configuration profile from a remote network share with proxy using the set

command. But, you can import the chassis configuration profile from the

local management station.

Synopsis

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -

f <filename>

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -

f <filename> -t xml

racadm set -f <filename> -t xml -u <username> -p <password> -

l <CIFS share>

racadm set -f <filename> -t xml -l <NFS share>

Input

• -f: import CMC configuration or CMC event filter from a file.

• -u: username of the remote share from where the file must be imported.

• -p: password for the remote share from where the file must be imported.

• -l: network share location from where the file must be imported.

• -t: specify the file type to be imported. The valid value is “xml”. This option is

case-sensitive.

Example

• Configure event filter configurations from a configuration file using remote

racadm

racadm -r 192.168.0.120 -u <username> -p <password> set -

f file.txt

• Configure a CMC from an XML configuration file on a local share using

remote racadm

racadm -r 192.168.0.120 -u <username> -p <password> set -

f myfile.xml -t xml

• Configure a CMC from an XML configuration file on a remote CIFS share

racadm set -f myfile.xml -t xml -u myuser -p mypass -l //

192.168.0.0/myshare

• Configure a CMC from an XML configuration file on a remote NFS share

racadm set -f myfile.xml -t xml -l 192.168.0.0:/myshare