Reference Guide

0-0:RAID.ChassisIntegrated.1-1 -assign yes -type ghs

racadm raid hotspare:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1 -assign yes -type dhs -

vdkey:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

cancelinit

Description

Stops an initialization operation on the specified virtual drive.

Synopsis

racadm raid cancelinit:<VD FQDD> {-current | -pending}

Input

• –current <optional>: Immediately performs the configuration operation.

NOTE: If this requires the system to restart, the system will be restarted.

• –pending: Save the configuration change for a later application. You can use a

combination of the –pending and –current flags on multiple commands to reduce

the possible number of system rerestartts.

Example

racadm raid cancelinit:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

cancelrebuild

Description

Stops a rebuild on a specified physical disk drive.

Synopsis

racadm raid cancelrebuild:<PD FQDD> {-current | -pending}

Input

• –current <optional>: Performs the configuration right now.

NOTE: If this requires the system to restart, the system is restarted.

• –pending: Save the configuration change for a later application. You can use a

combination of the –pending and –current flags on multiple commands to reduce

the possible number of system rerestarts.

Example

racadm raid cancelrebuild:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1

assignva

Description

Assigns a virtual disk to one or more virtual adapters.

NOTE: You can assign virtual disk to multiple virtual adapters when you select the

mode of assignment as multiple.

Synopsis

racadm raid assignva:<VA FQDD> -vdkey:<VD FQDD> -accesspolicy {na

| rw} -assignpolicy {single | multiple}{-current | -pending}

Input

• –current <optional>: Performs the configuration right now.

NOTE: If this requires the system to reboot, the system will reboot then.

• –pending: Save the configuration change for a later application. You can use a

combination of the –pending and –current flags on multiple commands to reduce

the possible number of system restarts.

• –assignpolicy {single|multiple}: Uses the specified assign policy to determine if the

Virtual Disk can be assigned to multiple Virtual Adapters.