Reference Guide

Example
racadm raid get enclosures -o -p Status
Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1
Status = Ok
Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Failed
racadm raid get enclosures -o
Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1
Status = Ok
RollupStatus = Ok
Name = VRTX2.5x25 0:0
BayId = 0
FirmwareVersion = 2.00
AssetTag = elan3
AssetName = VRTX200 ternal backplane
SasAddress = Not applicable
SlotCount = 25
Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
RollupStatus = Ok
Name = MD1220 0:1
EnclosurePosition = 1
ConnectedPort = 0
FirmwareVersion = 1.05
ServiceTag = 6Q2XMQ1
AssetTag = slot 5 1
AssetName = MD1220
RedundantPath = Present
SasAddress = Not applicable
SlotCount = 24
Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Failed
RollupStatus = Failed
Name = MD1220 0:0
EnclosurePosition = 0
ConnectedPort = 0
FirmwareVersion = 1.05
ServiceTag = BWQPWP1
AssetTag = slot 5 0
AssetName = MD1220
RedundantPath = Present
SasAddress = Not applicable
SlotCount = 24
get emms
Description Displays the status and attributes of the Enclosure Management Module (EMM).
NOTE: To use this subcommand, you must have the CMC Login User privilege.
Synopsis
racadm raid get emms -o -p Status
racadm raid get emms -o
Input
• -o — The -o is used to display the fault-tolerant status of a enclosure.
• -p — The network password of the share.
84