Reference Guide

To use this subcommand for CMC, you must have the Administrator privilege
for CMC, and for iDRAC you must have the Execute Diagnostic Commands
privilege.
Synopsis
racadm ping <ip4address>
ping6
Description Verifies that the destination IPv6 address is
reachable from an iDRAC or CMC, or with the
current routing-table contents. A destination IPv6
address is required. An ICMP echo packet is sent to
the destination IPv6 address on the basis of current
routing-table contents.
To use this subcommand for CMC, you must have
the Administrator privilege.
Synopsis
racadm ping6 <ipv6address>
Example
racadm iping6 198.162.0.2
IPING6 198.162.0.2 (192.168.0.1): 56
data bytes
64 bytes from 198.162.0.2: icmp_seq=0
ttl=121 time=2.9
ms
--- 198.162.0.2 ping statistics ---
1 packets transmitted, 1 packets
received, 0 percent
packet loss
round-trip min/avg/max = 2.9/2.9/2.9 ms
racdump
Description This subcommand displays the comprehensive
chassis status and configuration state information,
and historic event logs. Used for post-deployment
configuration verification and during debugging
sessions.
To use this subcommand for CMC, you must have
the Administrator privilege.
Synopsis
racadm racdump
Input Racdump includes the following subsystems and
aggregates the following RACADM commands:
• General System/RAC information -
getsysinfo
72