Reference Guide

NOTE: To use this subcommand, you must have CMC Login User privilege.

Synopsis

• racadm getversion

• racadm getversion [-b | -c] [-m <module>]

• racadm getversion -l [-m <module>] [-f <filter>]

Input

NOTE: The -b, -c and -l options are not available for CMC modules.

NOTE: The -l option requires that the Lifecycle Controller service is enabled on the

servers. For version information, see the RACADM Readme available at dell.com/

support/manuals.

• (none) — Displays the version information for all targets or devices.

Updatable>

server-2 2.20.20.20 (41) PowerEdge

M830 (VRTX) iDRAC 8 y

<Switch> <Model Name> <HW Version> <FW

Version>

switch-1 R1-2401 VRTX 1Gb Switch Module

A01 2.0.0.39

cmc-1

2.04.A00.201504150025 Y

cmc-2

2.04.A00.201504150025 Y

Main Board 2.2.A00.201506292078

System.Chassis.1#Infrastructure.1

Shared PERC8

23.13.06.0011 RAID.ChassisIntegrated.1-1

VRTX3.5x12 0:0 2.00

Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:0 ES68 Disk.Bay.

0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:1

ES68 Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1

• -b - Displays the server's current BIOS version (default is iDRAC version).

• -c - Displays the server's current CPLD version.

• -l - Displays the firmware versions Lifecycle Controller components.

• -f <filter> - Filters the components. Must be used with -1 and be one of the

following values:

– bios: BIOS

– idrac: iDRAC

– usc: Unified Server Configurator (Lifecycle Controller)

– diag: 32-bit Diagnostics