Reference Guide

Gateway = 192.168.0.1

IPv6 Enabled = 0

Autoconfiguration Enabled = 0

Link local Address =

IPv6 Gateway = ::

VLAN Enable = 0

VLAN ID = 1

VLAN priority = 0

racadm getniccfg -m switch-1

DHCP Enabled = 1

IP Address = 192.168.0.12

Subnet Mask = 255.255.255.0

Gateway = 192.168.0.12

Output

The getniccfg subcommand displays an appropriate error message if the operation is not successful.

Otherwise, the output is displayed in the following format:

IPv4 settings:

NIC Enabled = 1

IPv4 Enabled = 1

DHCP Enabled = 1

IP Address = 10.35.0.64

Subnet Mask = 255.255.255.0

Gateway = 10.35.0.1