Reference Guide

Slot-4 flexaddress enabled = 1

slot4-idrac Controller 18:A9:9B:FD:C7:57 F8:DB:88:3D:

9F:A7(active)

slot4-A 10 GbE KR 00:90:FA:51:36:54 F8:DB:88:3D:

9F:A8(active)

10 GbE KR/3 00:90:FA:51:36:55 F8:DB:88:3D:

9F:AA(active)

FCoE-WWN 10:00:00:90:FA:

51:36:55

20:01:F8:DB:88:3D:

9F:AA(active)

10 GbE KR/3 00:90:FA:51:36:56 F8:DB:

88:3D:A2:78(active)

NOTE: 10 GbE KR/3— The value 3 indicates the protocol type.

getioinfo

Description Displays general information about the I/O modules on the chassis.

To use this subcommand, you must have the CMC Login User privilege.

NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet,

Fiber Channel, and Infiniband.

Synopsis

racadm getioinfo

racadm getioinfo [-m <module>]

racadm getioinfo [-m <module>][-s]

Input -m — Specifies the module or device. The <module> must be switch — <n>, where n

= 1–2

-s — Displays the stack information.

Example

racadm getioinfo

<IO> <Power> <Name> <Type> <Presen

ce>

switch-

ON R1-2401

VRTX

1Gb

Switch

Module

Master

Gigabit

Etherne

Present OK ON Master N/A