Reference Guide

getflexaddr

Description Enabled or disabled status is displayed for the

entire chassis and fabric ID decoder. Use the

command with -i option to display the

MACs/WWN on a per-slot-basis

The decoder values in the Type column indicate

the protocols of the network cards:

• 0— Unsupported

• 1— ISCSI

• 2— FCoE-FIP

• 3— iSCSI/FCoE-FIP

To use this subcommand, you must have CMC

NOTE: If FlexAddress is not activated on the

chassis, the command displays server-

assigned MAC/WWN addresses. If the slot is

empty, the command leaves the server-

assigned MAC/WWN addresses blank. If an

external console controls the MAC/WWN

addresses, the command displays an

externally managed message.

Synopsis

racadm getflexaddr [-i <slotNum>]

Input -i <slotNum> — Specifies the slot information to be

displayed. <slotNum> must be from 1 to 4.

Example

Displays the current FlexAddress settings for all the slots and fabrics.

racadm getflexaddr

<Slot#> <Status> <Server Presence>

1 Enabled Present

2 Enabled Present

3 Enabled Not Present

4 Enabled Not Present

Displays the current FlexAddress setting for slot 4

racadm getflexaddr -i 4

Slot-4 server presence = Present