Reference Guide

feature

Description Displays all active chassis features. The information displayed includes feature name,

date activated, and the serial number of the SD card used to activate the feature.

Dell Feature Cards may contain more than one feature.

NOTE: To use this subcommand to deactivate FlexAddress or ExtendedStorage, you

must have the Chassis Configuration Administrator privilege. A user with login

privileges can view status only.

NOTE: To deactivate FlexAddress features, the chassis must be turned off.

Synopsis

• racadm feature -s

• racadm feature -d -c <featurename>

• racadm feature -r -c ExtendedStorage

Input

• -s — Displays the status of active features.

• -d — Deactivates the feature specified in -c option.

NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating

one of them results in deactivation of the other feature also. However,

ExtendedStorage is not affected by the deactivation of FlexAddress or

FlexAddresPlus.

• -r — Repair damaged/unformatted ExtendedStorage media.

NOTE: The –r switch requires that the ExtendedStorage feature be deactivated.

CAUTION: Using the -r switch reformats the SD media in the active CMC cardslot.

Any existing ExtendedStorage data will be lost.

• -c — <featurename> must be one of the following:

• flexaddress (with -d)

• flexaddressplus (with -d) ExtendedStorage (with -d or -r)

featurecard

Description Verifies proper SD card installation and displays the

SD card status.

To use this subcommand, you must have the

Chassis Configuration Administrator privilege.

Synopsis

racadm featurecard -s

Input -s — Lists active SD card features and SD card

status.