Reference Guide

• -6 — Enables IPv6 auto configuration (when used with -d.) Sets static

IPv6 addresses (when used with -s).

• -q — Displays or modifies the quick deploy parameters.

• -n <numofblades> — Specifies the number of reserved IP addresses for

quick deploy. The valid values are 2 and 4.

Output None

Example

• racadm deploy -m server-8 -s 192.168.0.20

255.255.255.0 192.168.0.1

The server was deployed successfully.

The deploy command generates an error when used on the extension

slot of a multi-slot server.

• racadm deploy -m server-9 192.168.0.11 255.255.255.0

192.168.0.1

ERROR: Server in slot 9 is an extension of the server in slot 1.

• rracadm deploy -m server-7 -u root -p calvin -s -6 ::/

64 :: 10

Displayable Characters

Displayable characters include the following set:

abcdefghijklmnopqrstuvwxwz

ABCDEFGHIJKLMNOPQRSTUVWXYZ

0123456789~`!@#$%^&*()_+-={}[]|\:";'<>,.?/

eventfilters

Description

Gets, sets, and displays the list of event filter settings.

To use this subcommand with the get option, you must have the CMC Login

User privilege.

Synopsis

racadm eventfilters <eventfilters command type>

racadm eventfilters get -c <alert descriptor>

racadm eventfilters set -c <alert descriptor>-n

racadm eventfilters set -c <alert descriptor>-r

NOTE: The general format of an alert descriptor:

cmc.alert.category.[subcategory].[severity]

where, category is mandatory, but subcategory and severity are optional.

A severity cannot precede a subcategory.