Reference Guide

To clear the chassis log, you must have the Clear Logs Administrator privilege.
Synopsis
racadm chassislog clear racadm -r<CMC IP> -u<CMC username> -
p<CMC password> chassislog clear
Example
• Clear the Chassis Log
racadm chassislog clear
• Clear the Chassis Log using remote racadm
racadm -r 192.168.0.11 -u root -p calvin chassislog
clear
chassisaction
Description Executes a power action on the chassis or a
switch.
To use this subcommand, you must have the
Chassis Control Administrator privilege.
Synopsis
racadm chassisaction [-m <module>]
<action>
Input
• -m <module> — Module on which you want to
carry out the action. Values are:
– chassis - this is the default value, if -m is not
specified.
– switch-n, where n=1
• <action> — Action that you want to execute on
the specified module. Values are:
– powerdown — (Chassis only) Turns off the
chassis.
– powerup — (Chassis only) Turns on the
chassis.
– powercycle — Power cycles the module.
– nongraceshutdown — (Chassis only) Non-
gracefully turns off the chassis.
– reset — Performs a hard reset of the
module.
When <module> = switch, <action> must be
powercycle or reset.
Output None
Example Perform a reset of switch-1:
racadm chassisaction -m switch-1 reset
Module power operation successful.
23