Reference Guide

– System
– Storage
– Updates
– Audit
– Config
• -q - The sequence number from which the records must be displayed.
• -n - Specifies the n Number of records to be displayed.
• -r - Displays events that have occurred after this time. The time format is
yyyy-mm-dd HH:MM:SS. The time stamp must be provided within double
quotes.
• -e - Displays events that have occurred before this time. The time format is
yyyy-mm-dd HH:MM:SS. The time stamp must be provided within double
quotes.
• -f <filename> - Specifies the file location and name where the chassis log is
exported.
• -a <name> - Specifies the FTP Server IP address or FQDN, user name, and
password.
• -d <path> - Specifies the path to the file on the FTP server.
• -l <location> - Specifies the location of the network share or area on file
system where chassis log is exported. Two types of network shares are
supported:
— SMB mounted path: //<ipaddress or domain name>/<share_name>/
<path_to_image>
— NFS mounted path: <ipaddress>:/<path_to_image>.
• -u <user> — Specifies the user name for accessing the FTP Server, or
Domain and User Name for accessing network share location.
• -p <password> — Specifies the password for accessing the FTP Server or
Share location.
• -s — The severity used to filter the records. Provide multiple severities using
a "," as the delimiter. The value is case-insensitive. Valid Severity values:
– 1. Warning
– 2. Critical
– 3. Info
NOTE: To view or export the Chassis log, only the CMC Login User
privilege is required.
Example
• Display the number of records present in the Chassis Log:
racadm chassislog view -i
• Display the records under the storage category with severity set to warning:
racadm chassislog view -c storage -s warning
• Display the records under storage and system categories with severities set
to warning or critical:
racadm chassislog view -c storage,system -s
warning,critical
• Display the records having severities set to warning or critical, starting from
sequence number 4:
racadm chassislog view -s warning,critical -q 4
• Display 5 records starting from sequence number 20:
racadm chassislog view -q 20 -n 5
21