Reference Guide

testemail -- test CMC e-mail notifications
testfeature -- test CMC feature x
testtrap -- test CMC SNMP trap notifications
traceroute -- determine the route of a packet
traceroute6 -- determine the route of a packet
Example for RACADM ? <subcommand>
racadm ? getsysinfo
getsysinfo -- display general CMC and system information
Usage:
racadm getsysinfo [-d] [-c] [-A] [-4] [-6]
-----------------------------------------------------------
Valid Options:
-d : show CMC information
-c : show chassis information
-A : do not show headers or labels
-4 : show CMC IPv4 information
-6 : show CMC IPv6 information
help and help <subcommand>
Description Lists all the subcommands available for use with RACADM and provides a short
description for each. You may also type a subcommand after help.
Synopsis
• racadm help
• racadm help <subcommand>
Input None
Output
• The help command displays a complete list of subcommands.
Example
racadm help getsysinfo
chassislog
Description
Allows you to view, export, or clear the chassis log history.
To clear a chassis log, you must have the Clear Logs Administrator privilege.
NOTE: It is recommended that you use Firmware RACADM to run this
subcommand.
Synopsis
racadm chassislog view -i <nNumber of records>
-c <log type> -s <severity>
-q <sequence no.> -n <number of records>
-r <
start timestamp> -e <end timestamp>
Input
• -i — Displays the number of records present in the active log. You cannot
use this option with any other option.
• -c — The log type to filter the records. Provide multiple categories using a
"," as the delimiter. The value is case-insensitive. Valid Category values:
– All
20