Reference Guide

Default ::
Example
$ racadm getconfig -g cfgIPv6LanNetworking
cfgIPv6Enable=1
cfgIPv6AutoConfig=1
cfgIPv6Address=::
cfgIPv6PrefixLength=64
cfgIPv6Gateway=::
cfgIPv6DNSServersFromDHCP6=1
cfgIPv6DNSServer1=::
cfgIPv6DNSServer2=::
If both IPv4 and IPv6 are enabled on the CMC, IPv6 DNS servers take priority. The order of preference for
DNS servers is:
• cfgIPv6DNSServer1
• cfgIPv6DNSServer2
• cfgDNSServer1
• cfgDNSServer2
cfgCurrentLanNetworking (Read Only)
This group displays the current CMC NIC properties.
Use this object with the getconfig subcommand.
To use this object property, you must have the CMC Login User privilege.
Synopsis
racadm getconfig -g cfgCurrentLanNetworking
cfgNicCurrentIPv4Enabled
Description Indicates whether IPv4 is enabled on the CMC. If
the current property value is set to 0 (false), the
remote network interfaces to the CMC are not
accessible over IPv4.
Legal Values
Default
Example
racadm getconfig -g cfgCurrentLanNetworking
# cfgNicCurrentIPv4Enabled=1
174