Reference Guide

cfgRacTuneIpBlkPenaltyTime (Read/Write)
Description Defines the time span in seconds that session
requests from an IP address with excessive failures
are rejected.
Legal Values
2–65535
Default 300
cfgRacTuneSshPort (Read/Write)
Description Specifies the port number used for the SSH
interface.
Legal Values
10–65535
Default 22
cfgRacTuneTelnetPort (Read/Write)
Description Specifies the port number used for iDRAC or CMC
Telnet interface.
NOTE: For CMC, the following port numbers
are reserved and cannot be used: 21, 68, 69,
111, 123, 161, 546, 801, 4096, 5988, 5989,
6900, 9000, and 60106.
Legal Values
• For iDRAC: 1 – 65535
• For CMC: 10 – 65535
Default 23
cfgRacTuneDaylightOffset (Read Only)
Description Specifies the daylight savings offset (in minutes) to use for the RAC Time. This
value is 0 if the time zone is not a Daylight Saving time zone.
Legal Values 0 – 60
Default 0
Example
racadm getconfig -g cfgRacTuning [-m server-<n>] -o
<
object name> <object value>
cfgRacTuneRemoteRacadmEnable=1
cfgRacTuneWebserverEnable=1
cfgRacTuneHttpPort=80
140