Reference Guide

cfgSerialConsoleEnable (Read/Write)
Description Enables or disables the RAC or CMC serial console interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgSerialConsoleIdleTimeout (Read/Write)
Description The maximum number of seconds to wait before
an idle serial session is disconnected.
Legal Values
• 0 = No timeout
• 60 – 10800
Default
1800
cfgSerialConsoleNoAuth (Read/Write)
Description Enables or disables the RAC or CMC serial console
login authentication.
Legal Values
• 0 (enables serial login authentication)
• 1 (disables serial login authentication)
Default 0
cfgSerialConsoleCommand (Read/Write)
Description Specifies a serial command that is executed after a
user logs into the serial console interface.
Legal Values
A string representing a valid serial command. For
example, connect server-1.
Default <blank>
cfgSerialConsoleColumns
Description Specifies the number of columns in the terminal
window command line connected to the serial
port. You must log out, then log in again for the
changes to take effect.
NOTE: The prompt counts as two characters.
133