Reference Guide

cfgRhostsNtpMaxDist
Description Specifies the NTP maximum distance parameter
used to aid in NTP configuration.
Legal Values 1–128
Default 16
cfgRhostsSyslogEnable (Read/Write)
Description Enables or disables remote syslog to allow the RAC
and SEL logs to be written to up to three remote
syslog servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read/Write)
Description Remote syslog port number to use for writing the
RAC and SEL logs to a remote syslog server.
This setting takes effect only if the
cfgRhostsSyslogEnable parameter is set to 1
(enabled).
Legal Values 10–65535
NOTE: The following port numbers are
reserved and cannot be used: 21, 68, 69, 123,
161, 546, 801, 4096, 5988, 5989, 6900, 9000,
60106.
Default 514
cfgRhostsSyslogServer1 (Read/Write)
Description Specifies the first of three possible remote syslog
servers to store the RAC and SEL logs.This property
is only valid if cfgRhostsSyslogEnable is set to 1
(enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
125