Reference Guide

Default 0
cfgNicVLanId (Read or Write)
Description Specifies the VLAN ID for the network VLAN
configuration (in CMC for iDRAC Enterprise on
server modules). This property is only valid if
cfgNicVLanEnable is set to 1 (enabled).
Legal Values 1 – 4000 and 4021 – 4094
Default 1
Example
racadm config -g cfgLanNetworking -o
cfgNicVlanID
1
cfgDNSDomainNameFromDHCP (Read/Write)
Description Specifies that the DNS domain name should be
assigned from the network DHCP server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgIPv6Enable and
cfgIPv6AutoConfig are set to 1 (true).
The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following
properties are set to 1 (true):
• cfgNicIPv4Enable
• cfgNicUseDhcp
• cfgIPv6Enable
• cfgIPv6AutoConfig
• cfgDNSDomainNameFromDHCP
• cfgDNSDomainName (Read/Write)
The network administrator must make sure that these DHCP servers are configured to provide the same
DNS domain name to the CMC, otherwise the domain name becomes unpredictable.
118