Reference Guide

Option Description
• ldap — Tests LDAP configuration and operation
(requires user name and password).
-u <username> The user name specified in an appropriate format
for the selected authentication method. That is,
Active Directory users are specified as
user_name@domain_name.
-p <password> The password for the indicated user account.
-d <bitmask> A bitmask (specified as a hexadecimal value) to
select various diagnostic messaging levels. This
option is optional.
NOTE: -d option is not supported with the
remote racadm interface.
testfeature -f ad
Description Tests Active Directory configuration using simple
authentication (user name and password). Use the
optional -d switch to obtain additional diagnostic
information, as needed.
This subcommand when executed performs the
following:
• Checks command syntax.
• Verifies whether the required system resources
are available.
• Validates Active Directory configuration.
• Verifies the SSL certificate and if the certificate
signing request (key) exists.
• Acquires LDAP and Global Catalog Service
records from DNS.
• Acquires user privileges from the Active
Directory server.
• Checks the time to acquire user privileges with
the allotted time to login.
NOTE: In the event of an error, the command
displays the test that failed, all the tests
performed earlier to the test that failed, and all
the error messages.
Synopsis
testfeature -f ad -u <username> -p
<password>
[-d <diagnostic-message-level>]
Example
• testfeature –f ad –u user@domain –p
secret
SUCCESSFUL: User permissions are xxxxxppp.
The last three digits are the user's permissions.
112