Reference Guide

The sslcsrgen -s subcommand returns one of the
following status codes:
• CSR was generated successfully.
• CSR does not exist.
Example
racadm sslcsrgen -s
or
racadm sslcsrgen -g -f c:\csr
\csrtest.txt
NOTE: Before a CSR can be generated, the CSR fields must be configured in the RACADM
cfgRacSecurity group. For example: racadm config -g cfgRacSecurity -o
cfgRacSecCsrCommonName MyCompany
NOTE: In telnet/ssh console, you can only generate and not download the CSR file.
sslresetcfg
Description Restores the web-server certificate to factory
default and restarts web-server. The certificate
takes effect 30 seconds after the command is
entered.
To use this subcommand, you must have the
Chassis Configuration Administrator privilege for
CMC.
Synopsis
racadm sslresetcfg
Example
$ racadm sslresetcfg
Certificate generated successfully and
webserver restarted.
set tempprobes
Description Sets the minimum and maximum warning threshold of temperature probe in the
enclosure
Synopsis
racadm raid set tempprobes:TempSensor.Embedded.
0:Enclosure.External.1 0:RAID.ChassisSlot.6-1 –p
MinimumWarningThreshold <value>
racadm raid set tempprobes:TempSensor.Embedded.
0:Enclosure.External.1 0:RAID.ChassisSlot.6-1 –p
MaximumWarningThreshold <value>
Input -p— The network password of the share.
Example
110