Users Guide

Exporting Chassis Conguration Proles
You can export chassis conguration proles that are saved on the network share to a specied path on a management station.
To export a stored prole, perform the following tasks:
1
Go to the Chassis Conguration Proles page. In the Chassis Conguration Proles > Stored Proles section, select the required
prole and then click Export Copy of Prole.
A File Download message is displayed prompting you to open or save the le.
2 Click Save or Open to export the prole to the required location.
Editing Chassis Conguration Proles
You can edit chassis conguration prole name of a chassis.
To edit a chassis conguration prole name, perform the following tasks:
1 Go to the Chassis Conguration Proles page. In the Chassis Conguration Proles > Stored Proles section, select the required
prole and then click Edit Prole.
The Edit Prole window is displayed.
2 Enter a desired prole name in the Prole Name eld and click Edit Prole.
Operation Successful message is displayed.
3 Click OK.
Deleting Chassis Conguration Proles
You can delete a chassis conguration prole that is stored on the network share.
To delete a chassis conguration prole, perform the following tasks:
1 Go to the Chassis Conguration Proles page. In the Chassis Conguration Proles > Stored Proles section, select the required
prole and then click Delete Prole.
A warning message is displayed indicating that deleting a prole would delete the selected prole permanently.
2 Click OK to delete the selected prole.
Conguring Multiple CMCs through RACADM Using
Chassis Conguration Proles
By using chassis conguration proles, you can export the chassis conguration proles as an XML le and import it to another chassis.
Use RACADM get command for export operation and set command for import operation.You can export chassis proles (XML les) from
CMC to the network share or to a local management station and import chassis proles (XML les) from the network share or from a local
management station.
NOTE
: By default, the export is done as clone type. You can use the –—clone to get the clone type prole in XML le.
The import and export operation to and from the network share can be done through local RACADM as well as remote RACADM. Whereas,
the import and export operation to and from the local management can be done only through remote RACADM interface.
Conguring
CMC 77