Users Guide

Field Description
components and devices on that server are automatically refreshed in case there has been a change of
rmware version on any of the components or devices. An information icon is also presented adjacent to the
current state, which provides additional information about the current job status. This information can be
viewed by clicking or pausing the mouse over the icon.
Update Click to select the component or device for rmware update on the server.
Viewing rmware inventory using RACADM
To view rmware inventory using RACADM, use the getversion command:
racadm getversion -l [-m <module>] [-f <filter>]
For more information, see the Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide
available at dell.com/support/manuals.
Saving chassis inventory report using CMC web interface
To save the chassis inventory report:
1 In the system tree, go to Server Overview, and then click Update > Server Component Update.
The Server Component Update page is displayed.
2 Click Save Inventory Report.
The Inventory.xml le is saved on an external system.
NOTE
: The Dell Repository Manager Application uses the Inventory.xml le as an input to create a repository of updates for
all the blades available in the chassis. This repository can be later exported to a network share. Update from Network Share
mode of rmware update uses this network share to update the components of all the servers. You must have CSIOR
enabled on the individual servers and save the chassis inventory report every time there is a change to the chassis hardware
and software conguration.
Conguring network share using CMC web interface
To congure or edit the Network Share location or credentials:
1 In the CMC web interface, in the system tree, go to Server Overview and then click Network Share.
The Edit Network Share page is displayed.
2 In the Network Share Settings section, congure the following settings as required:
• Protocol
• IP Address or Host Name
• Share Name
• Update folder
• File Name (optional)
NOTE
: File Name is optional only when the default catalog le name is catalog.xml. If the catalog le name is changed,
then the new name must be entered in this eld.
• Prole Folder
• Domain Name
• User Name
Updating
rmware 51