Users Guide

Supported interfaces
• CLI RACADM
• Remote RACADM
• Telnet RACADM
racdump includes the following subsystems and aggregates the following RACADM commands. For more information about racdump,
see the Dell Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide.
Table 32. Racadm commands for subsystems
Subsystem RACADM Command
General System/RAC information
getsysinfo
Session information
getssninfo
Sensor information
getsensorinfo
Switches information (IO Module)
getioinfo
Mezzanine card information (Daughter card)
getdcinfo
All modules information
getmodinfo
Power budget information
getpbinfo
NIC information (CMC module)
getniccfg
Trace log information
gettracelog
RAC event log
getraclog
System event log
getsel
Downloading SNMP Management Information Base le
The CMC SNMP Management Information Base (MIB) le denes the chassis types, events, and indicators. CMC enables you to download
the MIB le using the web interface.
To download the CMC's SNMP Management Information Base (MIB) le using the CMC web interface:
1 In the left pane, click Chassis Overview > Network > Services > SNMP.
2 In the SNMP Conguration section, click Save to download the CMC MIB le to your local system.
For more information about the SNMP MIB le, see the Dell OpenManage Server Administrator SNMP Reference Guide at dell.com/
support/manuals.
First steps to troubleshoot a remote system
The following questions are commonly used to troubleshoot high-level issues in the managed system:
• Is the system turned on or turned o?
• If turned on, is the operating system functioning, not responding, or stopped functioning?
• If turned o, did the power turn o unexpectedly?
162
Troubleshooting and recovery