Users Guide

3 In the WWN/MAC Addresses table, click Export to save the WWN/MAC addresses locally.
4 Click the against a slot or click Expand/Collapse All to expand or collapse the attributes listed for a specic slot or all the slots in
the WWN/MAC Addresses table.
5 From the Server Slot drop-down menu, select All Servers or a specic Slot to view the WWN/MAC Addresses attributes for all
servers or servers in specic slots only respectively.
6 From the Fabric drop-down menu, select one of the fabric types to view details for all or specic type of management or I/O fabric
associated with the servers.
7 From the Protocol drop-down menu, select All Protocols or one of the listed network protocols to view all the MACS or the MACs
associated with the selected protocol.
8 In the WWN/MAC Addresses eld, enter the MAC address to view only the slots associated with the specic MAC address.
Alternately, partially enter the MAC address entries to view the associated slots. For example, enter 4A to view the slots with MAC
addresses that contain 4A.
9 From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition status.
If a particular partition is disabled, the status is displayed as Disabled and the row displaying the partition is greyed out.
For information about the elds, see the CMC for Dell PowerEdge FX2/FX2s Online Help.
Viewing WWN or MAC address information using
RACADM
To view WWN/MAC address information for all servers or specic servers using RACADM, use the getexaddr and getmacaddress
subcommands.
To display Flexaddress for the entire chassis, use the following RACADM command:
racadm getflexaddr
To display Flexaddress status for a particular slot, use the following RACADM command:
racadm getflexaddr [-i <slot#>]
where <slot #> is a value from 1 to 4.
To display the NDC or LOM MAC address, use the following RACADM command:
racadm getmacaddress
To display the MAC address for chassis, use the following RACADM command:
racadm getmacaddress -m chassis
To display the iSCSI MAC addresses for all servers, use the following RACADM command:
racadm getmacaddress -t iscsi
To display the iSCSI MAC for a specic server, use the following RACADM command:
racadm getmacaddress [-m <module> [-x]] [-t iscsi]
To display the user-dened MAC and WWN address, use the following RACADM command:
racadm getmacaddress -c io-identity
racadm getmacaddress -c io-identity -m server -2
To display Ethernet and iSCSI MACS addresses of all LOMs or mezzanine cards, use the following RACADM command:
racadm getmacaddress -a
To display the console assigned MAC/WWN of all LOMs or mezzanine cards, use the following RACADM command:
racadm getmacaddress -c all
Using FlexAddress and FlexAddress Plus cards
139