Users Guide

• Basic Mode — In this mode you can view Server Slot, Fabric, Protocol, WWN/MAC addresses, and Partition Status. Only Active MAC
addresses are displayed in WWN/MAC address eld. You can lter using any or all of the elds displayed.
• Advanced Mode — In this mode you can view all the elds displayed in the basic mode and all the MAC types (Server Assigned, Flex
Address, and IO Identity). You can lter using any or all of the elds displayed.
In both the Basic mode and the Advanced mode, the WWN/MAC Addresses information is displayed in a collapsed form. Click the
against a slot or click Expand/Collapse All to view the information for a specic slot or all the slots.
You can also export the WWN/MAC Addresses information for all the servers in the chassis to a local folder.
For information about the elds, see the CMC for Dell PowerEdge FX2/FX2s Online Help.
Viewing basic WWN or MAC address information
using web interface
To view WWN/MAC Address information for each server slot or all servers in a chassis, in the basic mode:
1 Click Server Overview > Properties > WWN/MAC
The WWN/MAC Summary page displays the WWN/MAC Address Information.
Alternatively, click Server Overview > Slot <x> > Setup > FlexAddress to view the WWN/MAC Address information for a specic
server slot. The FlexAddress page is displayed.
2 In the WWN/MAC Addresses table, click Export to save the WWN/MAC addresses locally.
3 Click the against a slot or click Expand/Collapse All to expand or collapse the attributes listed for a specic slot or all the slots in
the WWN/MAC Addresses table.
4 From the View drop-down menu, select Basic, to view the WWN/MAC Addresses attributes in tree view.
5 From the Server Slot drop-down menu, select All Servers or a specic Slot to view the WWN/MAC Addresses attributes for all
servers or servers in specic slots only respectively.
6 From the Fabric drop-down menu, select one of the fabric types to view details for all or specic type of management or I/O fabric
associated with the servers.
7 From the Protocol drop-down menu, select All Protocols or one of the listed network protocols to view all the MACSsor the MACs
associated with the selected protocol.
8 In the WWN/MAC Addresses eld, to lter a slot associated with the specic MAC address, enter the exact MAC address.
Alternately, partially enter the MAC address entries to view the associated slots. For example, enter 4A to view the slots with MAC
addresses that contain 4A.
9 From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition status.
If a particular partition is disabled, the row displaying the partition is greyed out.
For information about the elds, see the CMC for Dell PowerEdge FX2/FX2s Online Help.
Viewing advanced WWN or MAC address information
using web interface
To view WWN/MAC Address Information for each server slot or all servers in a chassis, in the advanced mode:
1 Click Server Overview > Properties > WWN/MAC
The WWN/MAC Summary page displays the WWN/MAC Address Information.
2 From the View drop-down menu, select Advanced, to view the WWN/MAC Addresses attributes in detailed view.
In the WWN/MAC Addresses table displays Server Slot, Fabric, Protocol, WWN/MAC addresses, MAC address assignment type —
Server assigned, FlexAddress, or I/O Identity MAC, and Partition Status. A green check mark indicates the active address type, either
server-assigned, chassis-assigned, or remote assigned. MAC. If a server does not have the FlexAddress or I/O Identity enabled, then
the status for FlexAddress (Chassis-Assigned) or I/O Identity (Remote-Assigned) is displayed as Not Enabled.
138
Using FlexAddress and FlexAddress Plus cards