CLI Guide

Examples
racadm getconfig -g cfgAlerting -o cfgAlertingSourceEmailName
racadm config -g cfgAlerting -o cfgAlertingSourceEmailName [e-mail]
Object value modified successfully.
To use this object property, you must have Chassis Conguration Administrator and Test Alert User privileges.
cfgIPv6LanNetworking
This group is used to congure the IPv6 over LAN networking capabilities.
Use this object with the cong or getcong subcommands.
To use this object property for CMC, you must have Chassis Conguration Administrator privilege.
NOTE: To apply this setting to iDRAC, use the -m option.
The following sections provide information about the objects in the cfgIPv6LanNetworking group.
cfgIPv6Enable (Read or Write)
Table 292. Details of cfgIPv6Enable
Description Enables or disables CMC IPv6 stack.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgIPv6AutoCong (Read/Write)
Table 293. Details of
cfgIPv6AutoCong
Description Enables or disables the IPv6 Auto Conguration option.
NOTE: If this value is set to 0, the CMC disables auto conguration and statically assigns
IPv6 addresses. If this value is set to 1, the CMC obtains address and route information
using stateless auto conguration and DHCPv6.
NOTE: The CMC uses its MAC address for its DUID (DUID-LL) when communicating with a
DHCPv6 server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
152 CMC Property Database Group and Object Descriptions