CLI Guide

cfgADDcSRVLookupDomainName (Read/Write)
Table 231. Details of cfgADDcSRVLookupDomainName
Description This is the Active Directory Domain to use when cfgAddcSrvLookupbyUserDomain is set to 0.
Legal Values String. Maximum length = 254
Default Null
cfgADDcSRVLookupDomainName (Read/Write)
Table 232. Details of cfgADDcSRVLookupDomainName
Description This is the Active Directory Domain to use when cfgAddcSrvLookupbyUserDomain is set to 0.
Legal Values String. Maximum length = 254
Default Null
cfgADDcSRVLookupEnable (Read/Write)
Table 233. Details of cfgADDcSRVLookupEnable
Description Congures CMC to use pre‑congured domain controllers or to use DNS to nd the domain controller.
If using pre‑congured domain controllers, then the domain controllers to use are specied under
cfgAdDomainController1, cfgAdDomainController2, and cfgAdDomainController3. CMC does not
fail over to the specied domain controllers when DNS lookup fails or none of the servers returned by
the DNS lookup works.
Legal Values
• 1 (TRUE)—use DNS to look up domain controllers
• 0 (FALSE)—use pre‑congured domain controllers
Default 0
cfgADSpecifyServerEnable
Table 234. Details of cfgADSpecifyServerEnable
Description Allows you to enable or disable and specify an LDAP server or a global catalog server. Use
cfgADDomainController or cfgADGlobalCatalog to specify the IP address.
Legal Values
• 1 (enabled)
• 0 (disabled)
CMC Property Database Group and Object Descriptions 133