User's Manual

Using the RACADM Command Line Interface 69
getsvctag Displays service tags.
getsysinfo Displays general CMC and system information.
gettracelog Displays the CMCtrace log. If used with the -i option,
the command displays the number of entries in the CMC
trace log.
getversion Displays the current software version, model information,
and whether or not the device can be updated.
ifconfig Displays the current CMC IP configuration.
netstat Displays the routing table and the current connections.
ping Verifies that the destination IPv4 address is reachable from
the CMC with the current routing-table contents.
ping6 Verifies that the destination IPv6 address is reachable from
the CMC with the current routing-table contents.
racdump Displays the comprehensive chassis status and
configuration state information, as well as historic event
logs. Used for post deployment configuration verification
and during debugging sessions.
racreset Resets the CMC.
racresetcfg Resets the CMC to the default configuration.
remoteimage Connects, disconnects, or deploys a media file on a remote
server
serveraction Performs power management operations on the managed
system.
setassettag Sets the asset tag for the chassis.
setchassisname Sets the name of the chassis.
setflexaddr Enables/disables FlexAddress on a particular slot/fabric,
when the FlexAddress feature is activated on the chassis
setled Sets the LED settings on a module.
setniccfg Sets the IP configuration for the controller.
setractime Sets the CMC time.
Table 4-1. RACADM Subcommands
(continued)
Command Description