User's Manual

6 Contents
4 Using the RACADM Command
Line Interface . . . . . . . . . . . . . . . . . . . . . 65
Using a Serial, Telnet, or SSH Console . . . . . . . . . 65
Logging in to the CMC
. . . . . . . . . . . . . . . 66
Starting a Text Console . . . . . . . . . . . . . . . 66
Using RACADM. . . . . . . . . . . . . . . . . . . . . . 66
RACADM Subcommands
. . . . . . . . . . . . . . 67
Accessing RACADM Remotely . . . . . . . . . . . 71
Enabling and Disabling the RACADM
Remote Capability
. . . . . . . . . . . . . . . . . . 72
Using RACADM Remotely. . . . . . . . . . . . . . 72
RACADM Error Messages . . . . . . . . . . . . . 73
Using RACADM to Configure the CMC. . . . . . . . . . 74
Configuring CMC IPv4 Network Properties . . . . . . . 74
Setting Up Initial Access to the CMC
. . . . . . . . 74
Viewing Current Network Settings . . . . . . . . . 75
Configuring the Network LAN Settings . . . . . . . 76
Configuring the Network Security
Settings
. . . . . . . . . . . . . . . . . . . . . . . 80
Using RACADM to Configure Users . . . . . . . . . . . 80
Before You Begin
. . . . . . . . . . . . . . . . . . 80
Adding a CMC User
. . . . . . . . . . . . . . . . . 81
Using RACADM to Configure Public Key
Authentication over SSH
. . . . . . . . . . . . . . . . . 83
Before You Begin
. . . . . . . . . . . . . . . . . . 83
Generating Public Keys for Windows
. . . . . . . . 84
Generating Public Keys for Linux
. . . . . . . . . . 84
Viewing the Public Keys
. . . . . . . . . . . . . . 85
Adding the Public Keys
. . . . . . . . . . . . . . . 85
Deleting the Public Keys
. . . . . . . . . . . . . . 85