User's Manual

352 Troubleshooting and Recovery
Using the Diagnostic Console
The Diagnostic Console page enables an advanced user, or a user under the
direction of technical support, to diagnose issues related to the chassis
hardware using CLI commands.
NOTE: To modify these settings, you must have Debug Command Administrator
privilege.
To access the Diagnostic Console page:
1
Log in to the CMC Web interface.
2 Click Chassis in the system tree.
3 Click the Troubleshooting tab.
4 Click the Diagnostics sub-tab. The Diagnostic Console page displays.
To execute a diagnostic CLI command, type the command into the Enter
RACADM Command field, and then click Submit to execute the diagnostic
command. A diagnostic results page appears.
To return to the
Diagnostic Console page, click Go Back to Diagnostic
Console
Page or Refresh.
The Diagnostic Console supports the commands listed in Table 11-11 as well
as the RACADM commands.
ERR_FWUPD_INIT_CALL 0x1427 5159
ERR_FWUPD_START_UPDATE_CALL 0x1428 5160
ERR_OP_NOT_CANCELABLE 0x1429 5161
BAD_FTP_USERNAME 0x142A 5162
DEVICE_NOT_AVAILABLE 0x142B 5163
Table 11-10. Firmware Update Error Codes (continued)
Error Class Error Value (Hex) Error Value (Decimal)