User's Manual

346 Troubleshooting and Recovery
Using RACADM
Open a serial/Telnet/SSH text console to the CMC, log in, and type:
racadm getmodinfo
Viewing the Event Logs
The Hardware Log and CMC Log pages display system-critical events that
occur on the managed system.
Table 11-7. Health Status Indicators
Item Description
OK Indicates that the component is present and
communicating with the CMC.
Informational Displays information about the component when there
is no change in health status.
Warning Indicates that only Warning alerts have been issued,
and corrective action must be taken. If corrective actions
are not taken within administrator-specified time, it
could lead to a component failure, communication
failure between the component and the CMC, and a
critical or severe failure that could affect the integrity
of the chassis.
Severe Indicates that at least one failure alert has been issued.
This means that the CMC can still communicate with
the component and that the health status reported is
critical. Corrective action must be taken immediately.
Failure to do so may cause the component to fail and
stop communicating with the CMC.
Unknown Displays when the chassis is first powered on. All chassis
components initially are indicated as "unknown" until
they are fully powered on.
No Value Indicates that the component is absent from the slot,
or the CMC cannot communicate with the component.
NOTE: It is not possible for the chassis to be absent.