User's Manual

336 Troubleshooting and Recovery
3 Specify the events for which you want the CMC to generate by typing:
racadm config -g cfgAlerting -o
cfgAlertingFilterMask <
mask value >
where <mask value> is a hexadecimal value between 0x0 and
0x017fffdf and must be expressed with the leading
0x characters.
Table 11-2 provides filter masks for each event type. For instructions on
calclulating the hex value for the filter mask you want to enable, see step 3
on "Using RACADM."
4 Enable e-mail alerting by typing:
racadm config -g cfgEmailAlert -o
cfgEmailAlertEnable 1 -i <
index >
where <index> is a value 1–4. The index number is used by the CMC to
distinguish up to four configurable destination e-mail addresses.
5 Specify a destination e-mail address to receive the e-mail alerts by typing:
racadm config -g cfgEmailAlert -o
cfgEmailAlertAddress
<email address> -i < index >
where <email address> is a valid e-mail address, and <index> is the
index value you specified in step 4.
6 Specify the name of the party receiving the e-mail alert by typing:
racadm config -g cfgEmailAlert -o
cfgEmailAlertEmailName
<email name> -i < index >
where <email name> is the name of the person or group receiving the
e-mail alert, and
<index> is the index value you specified in steps 4
and 5. The e-mail name can contain up to 32 alphanumeric characters,
dashes, underscores, and periods. Spaces are not valid.
7 Setup the SMTP host by configuring the
cfgRhostsSmtpServerIpAddr database property by typing:
racadm config -g cfgRemoteHosts -o
cfgRhostsSmtpServerIpAddr host.domain