User's Manual

Installing and Setting Up the CMC 31
4 Navigate to the SYSMGMT/ManagementStation/linux/rac directory.
To install the RAC software, enter the following command:
rpm -ivh *.rpm
5
For help with the RACADM command, type racadm help after
issuing the previous commands. For more information about RACADM,
see "Using the RACADM Command Line Interface."
NOTE: When using the RACADM remote capability, you must have write
permission on the folders where you are using the RACADM subcommands
involving file operations, for example:
racadm getconfig -f <file name>
Uninstalling RACADM From a Linux Management Station
1 Log on as root to the system where you want to uninstall the management
station features.
2 Use the rpm query command to determine which version of the DRAC
Tools is installed. Use the
rpm -qa | grep mgmtst-racadm
command.
3 Verify the package version to be uninstalled and uninstall the feature
by using the
rpm -e `rpm -qa | grep mgmtst-racadm`
command.
Configuring a Web Browser
You can configure and manage the CMC and the servers and modules
installed in the chassis through a Web browser. See the Supported Browsers
section in the Dell Systems Software Support Matrix on the Dell Support
website at support.dell.com/manuals.
Your CMC and the management station where you use your browser must be
on the same network, which is called the management network. Depending
on your security requirements, the management network can be an isolated,
highly secure network.
You must ensure that security measures on the management network,
such as firewalls and proxy servers, do not prevent your Web browser from
accessing the CMC.