User's Manual

308 Using the iKVM Module
Updating the iKVM Firmware
You can update the iKVM firmware using the CMC Web interface or
RACADM.
To update the iKVM firmware using the CMC Web interface:
1
Log in to the CMC Web interface.
2 Click Chassis in the system tree.
3 Click the Update tab. The Updatable Components page displays.
4 Click the iKVM name. The Firmware Update page appears.
5 In the Firmware Image field, enter the path to the firmware image file on
your management station or shared network, or click
Browse to navigate to
the file location.
NOTE: The default iKVM firmware image name is ikvm.bin; however, the iKVM
firmware image name can be changed by the user.
Front Panel
Connected
Indicates whether the monitor is connected to the front panel
VGA connector (Yes or No). This information is provided to
the CMC so it can determine whether a local user has front-
panel access to the chassis.
Rear Panel
Connected
Indicates whether the monitor is connected to the rear panel
VGA connector (Yes or No). This information is provided to
the CMC so it can determine whether a local user has rear-
panel access to the chassis.
Tiering Port
Connected
The iKVM supports seamless tiering with external KVM
appliances from Dell and Avocent using built-in hardware.
When the iKVM is tiered, the servers in the chassis can be
accessed through the screen display of the external KVM
switch from which the iKVM is tiered.
Front Panel
USB/Video Enabled
Displays whether the front panel VGA connector is enabled
(Yes or No).
Allow access to CMC
from iKVM
Indicates whether the CMC command console through iKVM
is enabled (Yes or No).
Table 9-5. iKVM Status Information
(continued)
Item Description