User's Manual
300 Using the iKVM Module
Logging In
1
Press <Print Screen> to launch OSCAR. The
Password
dialog box
appears.
2
Type your password and then click
OK
.
The Main dialog box appears.
Setting Automatic Logout
You can set OSCAR to automatically log out of a server after a period of
inactivity.
1
In the
Main
dialog box, click
Setup
and then
Security
.
2
In the
Inactivity Time
field, enter the length of time you want to stay
connected to a server before it automatically disconnects you.
3
Click
OK
.
Removing Password Protection From Your Console
1
From the
Main
dialog box, click
Setup
and then
Security
.
2
In the
Security
dialog box, single-click and press <Enter>, or double-click
in the
New
field.
3
Leaving the
New
field empty, press <Enter>.
4
Single-click and press <Enter>, or double-click in the
Repeat
field.
5
Leaving the
Repeat
field empty, press <Enter>.
6
Click
OK
if you only want to eliminate your password.
Enabling Screen Saver Mode With No Password Protection
NOTE: If your console is password protected, you must first remove password
protection. Follow the steps in the previous procedure before following
the steps below.
1
Select
Enable Screen Saver
.
2
Type the number of minutes (1 through 99) that you want to delay
activation of the screen saver.