User's Manual

294 Using the iKVM Module
4 To position the status flag on the desktop:
a Click Set Position. The Set Position Flag displays.
b Left-click on the title bar and drag it to the desired location on the
desktop.
c Right-click to return to the Flag dialog box.
NOTE: Changes made to the flag position are not saved until you click OK in the
Flag dialog box.
5 Click OK to save settings.
To exit without saving changes, click .
Managing Servers With iKVM
The iKVM is an analog switch matrix supporting up to 16 servers. The iKVM
switch uses the OSCAR user interface to select and configure your servers.
In addition, the iKVM includes a system input to establish a CMC command
line console connection to the CMC.
Peripherals Compatibility and Support
The iKVM is compatible with the following peripherals:
• Standard PC USB keyboards with QWERTY, QWERTZ, AZERTY,
and Japanese 109 layouts.
• VGA monitors with DDC support.
• Standard USB pointing devices.
• Self-powered USB 1.1 hubs connected to the local USB port on the iKVM.
• Powered USB 2.0 hubs connected to the Dell M1000e chassis’ front panel
console.
NOTE: You can use multiple keyboards and mice on the iKVM local USB port.
The iKVM aggregates the input signals. If there are simultaneous input signals from
multiple USB keyboards or mice, it may have unpredictable results.
NOTE: The USB connections are solely for supported keyboard, mouse,
and USB hubs. iKVM does not support data transmitted from other USB peripherals.