User's Manual

Using the iKVM Module 293
Controlling the Status Flag
The status flag displays on your desktop and shows the name of the selected
server or the status of the selected slot. Use the Flag dialog box to configure
the flag to display by server, or to change the flag color, opacity, display time,
and location on the desktop.
To access the Flag dialog box:
1
Press <Print Screen>. The Main dialog box appears.
2 Click Setup and then Flag . The Flag dialog box appears.
To specify how the status flag displays:
1
Select Displayed to show the flag all the time or Displayed and Timed to
display the flag for only five seconds after switching.
NOTE: If you select Timed by itself, the flag is not displayed.
2 Select a flag color from the Display Color section. Options are black, red,
blue, and purple.
3 In Display Mode , select Opaque for a solid color flag or Transparent to see
the desktop through the flag.
Table 9-3. OSCAR Status Flags
Flag Description
Flag type by name
Flag indicating that the user has been disconnected
from all systems
Flag indicating that Broadcast mode is enabled