User's Manual

Power Management 285
Using the Web Interface
1 Log in to the CMC Web interface.
2 Expand Servers in the system tree, and then select the server on which
you want to execute a power control operation. The
Server Status
page displays.
3 Click the Power Management tab. The Server Power Management
page displays.
4 Power Status displays the power status of the server (one of the following):
•
N/A - The CMC has not yet determined the power state of the server.
•
Off - Either the server is off or the chassis is off.
•
On - Both chassis and server are on.
•
Powering On - Temporary state between Off and On. When the
action completes successfully, the
Power State will be On .
•
Powering Off - Temporary state between On and Off. When the
action completes successfully, the
Power State will be Off .
5 Select one of the following Power Control Operations by clicking its radio
button:
•
Power On Server — Turns on the server power (equivalent to pressing
the power button when the server power is off). This option is disabled
if the server is already powered on.
•
Power Off Server — Turns off the server power (equivalent to pressing
the power button when the server power is on).
•
Graceful Shutdown — Powers off and then reboots the server.
•
Reset Server (warm boot) — Reboots the server without powering off.
This option is disabled if the server is powered off.
•
Power Cycle Server (cold boot) — Powers off and then reboots the
server. This option is disabled if the server is powered off.
6 Click Apply . A dialog box appears requesting confirmation.
7 Click OK to perform the power management action (for example, cause
the server to reset).
NOTE: All of the power control operations can be performed on multiple servers
from the Servers→ Power Management→ Control page.