User's Manual

Using the CMC With Microsoft Active Directory 223
Click the Products tab to add one or more RAC devices to the association.
The associated devices specify the RAC devices connected to the network
that are available for the defined users or user groups. Multiple RAC devices
can be added to an Association Object.
Adding RAC Devices or RAC Device Groups
To add RAC devices or RAC device groups:
1
Select the Products tab and click Add.
2 Type the RAC device or RAC device group name and click OK .
3 In the Properties window, click Apply and click OK .
Configuring the CMC With Extended Schema Active Directory and the
Web Interface
1 Log in to the CMC Web interface.
2 Select Chassis in the system tree.
3 Click the Network/Security tab, and then click the Active Directory
sub-tab. The Active Directory Main Menu page appears.
4 Select the Configure radio button , and then click Next . The Active
Directory Configuration and Management
page appears.
5 In the Common Setting s section:
a Select the Enable Active Directory check box so that it is checked.
b Typ e t h e Root Domain Name . The Root Domain Name is the fully
qualified root domain name for the forest.
NOTE: The Root domain name must be a valid domain name using the x.y
naming convention, where x is a 1–256 character ASCII string with no spaces
between characters, and y is a valid domain type such as com, edu, gov, int,
mil, net, or org.
c
Typ e t h e Timeout time in seconds. Configuration range:
15–300 seconds.
Default: 90 seconds