User's Manual

176 Using the CMC Web Interface
6 To deploy the setting to iDRAC, click Apply iDRAC Network Settings
button. If you made changes to the QuickDeploy settings, they will
also be saved.
7 To restore the iDRAC Network settings to the current values for each
installed blade, and update the QuickDeploy table to the last saved
QuickDeploy settings click
Refresh .
NOTE: Clicking Refresh button deletes all iDRAC QuickDeploy and iDRAC Network
configuration settings that have not been saved.
The iDRAC Network Settings table reflects future network configuration
settings; the values shown for installed blades may or may not be the same as
the currently installed iDRAC network configuration settings. Press the
Refresh button to update the iDRAC Deploy page with each installed
iDRAC network configuration settings after changes are made.
NOTE: Changes made to QuickDeploy fields are immediate, but changes made to
one or more iDRAC server network configuration settings may require a couple of
minutes to propagate from the CMC to an iDRAC. Pressing the Refresh button too
soon may display only partially correct data for a one or more iDRAC servers.
Launching iDRAC using Single Sign-On
The CMC provides limited management of individual chassis components,
such as servers. For complete management of these individual components,
the CMC provides a launch point for the server’s management controller
(iDRAC) Web-based interface.
To launch the iDRAC management console from the Servers page, use the
following steps:
1
Log in to the CMC Web interface.
2 Select Servers in the system tree. The Servers Status page appears.
3 Click the Launch iDRAC GUI icon for the server you want to manage.
To launch the iDRAC management console for an individual server:
1
Log in to the CMC Web interface.
2 Expand Servers in the system tree. All of the servers (1–16) appear in the
expanded
Servers list.
3 Click the server you want to view. The Server Status page displays.
4 Click the Launch iDRAC GUI icon.