User's Manual

162 Using the CMC Web Interface
Configuring Power Budgeting
The CMC allows you to budget and manage power to the chassis. The power
management service optimizes power consumption and re-allocates power to
different modules based on the demand.
For instructions on configuring power through the CMC, see "Configuring
and Managing Power" on page 263.
For more information on the CMC’s power management service, see "Power
Management" on page 247.
Table 5-27. Remote Syslog Configuration
Setting Description
Enabled Enables the transmission and remote capture of the System
Log on the specified server(s).
Legal Values: Checked (enabled), unchecked (disabled)
Default: unchecked (disabled)
Syslog Server 1 The first of three possible servers to host a copy of
the syslog. Specified as a hostname, an IPv6 address,
or an IPv4 address.
Syslog Server 2 The second of three possible servers to host a copy of
the syslog. Specified as a hostname, an IPv6 address,
or an IPv4 address.
Syslog Server 3 The third of three possible servers to host a copy of
the syslog. Specified as a hostname, an IPv6 address,
or an IPv4 address.
Syslog Port Number Specifies the port number on the remote server for
receiving a copy of the syslog. The same port number is
used for all three servers. A valid syslog port number is in
the 10-65535 range.
Default: 514